People frequently inquire about how to connect Apple TV to Wi-Fi without remote. So, if you are in the same situation as us, we are going to share the steps and approaches with you.
Don’t panic if you don’t have an Apple TV remote. There are still ways to connect your new Apple TV to WiFi.
You may connect your new Apple TV to WiFi without an Apple TV remote control by following these simple instructions. It’s quite simple and straightforward. Let’s get started.
Procedure to Connect Apple TV To Wi-Fi Without Remote
Method 1: Use your iPhone as a Remote Control
The Control Center’s Remote Feature allows you to control your Apple TV from your iPhone, and it’s not limited to using AirPlay to mirror your screen.
Step 1:
If it recognizes that you’ve set up the connections, the Apple TV controls are immediately active for iOS 12 or newer versions and iPadOS 13 or higher.
Step 2:
If your iOS device’s Control Center lacks the remote icon, go to the Settings option.
Step 3:
Then click on Control Center and manually add the Apple TV controls.
Step 4:
Go to the Customize Control menu and click the Plus button next to the Apple TV to enable Apple TV controls in the control center.
Step 5:
Swipe up to access Control Center, then tap the remote icon to access the Apple TV Remote.
Step 6:
After turning on the Apple TV, connect it to the Internet using an Ethernet cable.
Step 7:
You can now set up your Wi-Fi by going to Settings and then clicking on Network.
Step 8:
After that click on the Wi-Fi option and select your Wi-Fi network from the list.
Step 9:
Follow the instructions to establish the setup and enter the four-digit PIN on your iPhone or iPad to finish the process.
Method 2: Connect Apple TV to a Wireless Connection without a Remote
Before we go over the many techniques for connecting Apple TV to a wireless network without a remote, we should warn you that it can be difficult.
Because you won’t have the remote, you won’t be able to add the Wi-Fi login credentials. You can share the Wi-Fi SSID, password, and Apple ID with the Apple TV if you’re running iOS 9 or higher.
After that, turn on the Apple TV and wait for the start-up screen to appear before touching the iOS device to the box. As a result, fresh instructions will display on the screen and on both devices, and you will have access to the information on the wifi connection.
Method 3: Use a Standard TV Remote to Control the Apple TV
If you don’t have an Apple TV remote, you can use a conventional TV remote to control the Apple TV and enter the Wi-Fi network information instead.
Step 1:
The first step is to locate the proper TV remote, which must contain directional buttons.
Step 2:
You must now connect your Apple TV to the internet using an ethernet wire.
Step 3:
Then, using the control center on your iPhone, visit the General tab under settings and press on the remotes.
Step 4:
Select “learn remote” and then follow the instruction that shows on your screen.
Step 5:
Detach the ethernet cord and turn on Wi-Fi for the Apple TV using your regular TV remote once the on-screen instructions have been completed.
When the Apple TV is linked to the internet, you can continue to use the conventional remote to control and navigate the Apple TV.
Method 4: Use iPhone as a Remote
You’re not confined to utilizing AirPlay to mirror your screen; the Control Center’s remote capability lets you control Apple TV from your iPhone.
If you don’t see the remote icon in your iOS device’s control center, go to Settings> Control Center and manually add Apple TV controls to the Control Center.
To activate Apple tv controls in the Control Center, go to the Customize menu and click the Plus button next to Apple tv.
Turn on the Apple TV and use an Ethernet cable to connect to the Internet. Go to Settings, and then click on the Network option.
Method 5: Use New Remote
This is because we will show you how to use your iPhone as a remote to control Apple TV and connect it to your wireless network using this way. We will show you how to utilize your iPhone as a remote control in the section below.
If your iPhone or iPad is running iOS 12 or higher, or if your iPad is running iPadOS 13, you can use Apple TV controls, which will activate instantly once the connection is established.
If you don’t see the remote feature in the control center, go to the settings and add the Apple TV controllers.
Swipe up to open the control center and tap on the remote option to launch the Apple TV remote after adding the remote icon to the control center.
Now turn on the Apple TV and connect to the internet through ethernet. Then, open the settings and select the Wi-Fi network from the network tab to complete the configuration.
Follow the on-screen directions to begin the setup (you may be required to enter the PIN of your iPhone or iPad as the final step, so don’t hesitate).
Method 6: Connect your Apple TV to the Wi-Fi Connection without a Remote by using the remote interface
Volume buttons, for example, can be used to control volume, a menu button can be held to open the home screen, and Siri can be accessed by tapping the mic button.
Additionally, you can use the Bluetooth keyboard to input the Wi-Fi password. The Apple TV can be linked to and configured with the Bluetooth keyboard.
After configuring the keyboard, you can input the password and the Wi-Fi connection will be properly created.
Method 7: Using a Bluetooth Keyboard
Step 1:
To assist with Apple ID and WiFi configuration, keep your iPhone close by.
Step 2:
Check that your Bluetooth keyboard is near your Apple TV after turning it on, and then pair it.
Type the code on the keyboard when it shows on your television screen.
Step 3:
You can browse around the screen using the arrow keys and the return key on the keyboard during the setup procedure.
Method 8: Using the Macbook as a Bluetooth Keyboard
Step 1:
Connect your iPhone to your MacBook after turning off its WiFi and cellular data.
Step 2:
Using an Ethernet cable and a USB-C dongle, connect your Apple TV to the television’s HDMI connection and your Mac. Now you can turn on your Apple TV.
Step 3:
Select ‘Sharing’ from the selection area on your Mac. iPhone USB and Thunderbolt Ethernet
Step 4:
To allow sharing, check the “Internet Sharing” option in the service box.
Step 5:
Open the Apple TV Remote from the Control Center on your iPhone. Check that your Apple TV is recognized in the app, then connect and type using the PIN displayed on your TV.
Step 6:
You will need a Bluetooth keyboard now, but if you don’t have one, don’t panic. This allows your Mac device to detect Bluetooth.
Step 7:
Now use your iPhone’s remote capability to manage your Apple TV and pair your Mac with your iPhone as a Bluetooth device.
Step 8:
Remove the Ethernet cable from Apple TV because it is no longer required.
Step 9:
You can move around with your keyboard’s arrow keys, while the ESCAPE and ENTER keys let you enter and exit options.
Step 10:
You can reconnect your iPhone to WiFi once WiFi has been configured. Make sure your Apple TV and Mac are both connected to the same WiFi network.
FAQ’s
Q:- Without a remote, how can I connect my TV to the internet?
Ans:- Connect the USB keyboard and mouse to the tv and use the mouse to navigate to the tv’s wifi settings to connect to your wifi network without using the remote.
Final Thought
If your Apple TV remote is lost or broken, but you still want to connect it to WiFi, you can use an infrared remote you have. An ethernet cable, the Apple TV Remote software, and WiFi router access are also required.
We did our best to provide information on how to connect Apple TV to WiFi without remote. We hope this tutorial may assist you in resolving this issue. If you run across any issues, please let us know in the comments section.
You may also like:
Fix Xfinity Router Blinking Orange: How to
