Ring Doorbell Not Charging: How to Fix it?

The Ring Doorbell is unquestionably one of the greatest products in its class. It’s simple to use, and intelligent, and it just makes your life easier. Today we will discuss how to fix ring doorbell not charging.

It senses motion, so you will be warned if you have unwelcome visitors at any time.

It has a fantastic 1080p HD camera with a field of vision of 155 degrees horizontally and 90 degrees vertically. 

Because the Ring doorbell has night vision, you can inspect the exterior of your front door in real-time, regardless of whether it’s day or night.

Not only that, but it also includes two-way audio, allowing you to converse with visitors prior to unlocking your door.

So, the battery is the source of the problem. The Ring doorbell has a rechargeable battery, unlike the 2nd generation doorbell, which has a non-removable battery. 

That implies that if the battery dies, your only alternative is to hardwire your device to a transformer and have it plugged in all the time.

Procedure to Fix Ring Doorbell Not Charging

In most circumstances, you can resolve this problem from the comfort of your own home. Simply follow the steps outlined below, and everything should be up and running again in no time.

Try Restarting the Doorbell

Though this solution appears to be far too basic to be useful in this situation, you may be surprised. Restarting any high-tech device is an excellent way to clean out any faults that have developed over time.

In fact, a simple restart works so regularly that IT specialists joke that if everyone tried it first, they’d be out of a job. Let’s give it a shot. It will only take a minute and is rather simple to complete.

In reality, you can accomplish it by pressing the power button on your device’s app. You can also turn it off manually if you don’t want to do it that way.

If you do it this way, make sure to turn it off for a time before turning it back on. Either of them will restart everything you need on the doorbell and will most likely improve its performance.

With any luck, this is the last piece of advice you’ll require. If not, don’t panic we have got a few more ideas to consider.

Check for Faulty Wiring

Before we go any further with this, there’s one thing we should mention. It’s not a good idea to proceed with this tip unless you have prior wiring experience.

After all, if you don’t, it’s all too easy for something to go wrong. You will need to know what you’re doing because there are several wires involved.

If you don’t know what you are doing, it’s far preferable to enlist the support of someone who does. It won’t be difficult to examine the wiring once you’ve enlisted help. First and foremost, double-check that the battery is connected to the circuitry.

It’s uncommon, but it’s possible that it was overlooked by accident. Any technician worth his or her salt will see this right away.

There could be a twisted or frayed wire, a clear issue with the battery, or simply a broken link in the mix.

Apart from that, there isn’t much else to look into. Again, if you don’t know how, don’t check any of this yourself.

Bring it in for Repairs

Unfortunately, if the wiring is fine and you’ve tried resetting your Ring Doorbell, the situation isn’t looking good.

This would signal that something is awry, and it’s a lot more terrible than we thought. At this point, we recommend that you have it uninstalled by someone who knows what they’re doing.

The only obvious line of action after that is to send it to an authorized technician or a warranty center. The rationale for this is that if they make things worse, your warranty will not be voided.

Most likely, all that is required to resolve the issue is the replacement of the battery. Whatever the case may be, it is now in the hands of professionals.


Q:- Why is not my Ring Doorbell charging?

Ans:- Check that your WiFi connection is good and that there are no issues with the charger or charging cable if your Ring Doorbell is not charging. 

If the breaker has tripped, check the circuit breaker box (MCB Box) in your home. If the problem persists, your ring doorbell’s battery may be broken and must be replaced.

Q:- How can we reactivate my Ring Doorbell after it has been charged?

Ans:- Try a hard reset if your ring video doorbell two is completely charged but the light does not turn on when you click the black button. Hold down the black button for 15 seconds to do a hard reset.

Q:- What is the best way to see if my Ring Doorbell is charging?

Ans:- Connect your charging wire to the doorbell’s charging connector on the back. As soon as the doorbell’s front ring-shaped light battery is charged, it will fill up. It is fully charged when the light is solid blue.

Final Thought

Even after several big players in the internet-connected video doorbell industry, such as Google Nest and Amazon, Ring devices have remained popular among homes.

The key cause for this has been the high quality of Ring’s products. However, despite having a high-quality product, the company’s website forums are full of minor issues and niggles experienced by some of its consumers.

Many consumers have complained about the battery charging issue, which has been one of the most chronic and pervasive issues. 

We have covered why the Ring doorbell battery won’t charge, even if it’s hardwired to the power source, and how to remedy the problem in this article.

You may also like:

Ring Doorbell Live View Not Working: How to Fix

Save Ring Doorbell Video Without Subscription: How to

Fix Ring Doorbell Not Ringing in Minutes: How to