Roku Remote Volume Not Working: How to Fix it?

When you try to adjust the volume level on your Roku streaming device, it no longer responds to your commands? It’s no problem. We have discovered fast fixes for the Roku remote volume not working problem. The Roku volume control issue is one such issue. 

However, if nothing happens, that means the Roku remote volume not working. Although the company has been in the market for a long time and continues to enhance its technology on a regular basis, users have reported faults with its products. 

Although the Roku remote is created with cutting-edge technology, several customers have reported troubles with it. 

Roku remote volume not working is one such issue. We have included many options below that you can use to solve this issue.

Procedure to Roku Remote Volume Not Working

Most Roku remote controls have a problem with the volume not working. It could be your fault, a software issue, or a hardware flaw. 

Whatever the case may be, you no longer need to be concerned because we have gathered a list of remedies to get your Roku enhanced remote control working again. 

Clean Your Volume Buttons They May Be Stuck 

The volume buttons may become unresponsive due to the remote’s hardware (body). The volume buttons on ancient remotes, for example, frequently become stuck. As a result, pressing them will have no effect.

To resolve such issues, you must clean the remote and volume buttons. 

Remove the dirt or grease from the remote using any cleaning. 

Then, click the volume buttons repeatedly, and try controlling the TV with the remote once more.

Press Buttons Randomly

You could use the remote while eating if you are used to watching TV while eating. The grease and dirt from your hands end up on the remote at that point. 

As a result, the remote buttons malfunction or become stuck. Remove the remote batteries and press all of the Roku remote buttons at random to resolve the issue. 

Repeat this step for all of the buttons. After that, replace the batteries and use the remote. It should now work.

Try Fixing Sound-Related Issues

If none of the previous suggestions help you solve your problem, there are a few things you could look into.

Step 1:

Make sure the devices you have connected to Roku can play audio.

Step 2:

Disconnect all of the gadgets that aren’t in use.

Step 3:

Check the brand of your television and see if it supports audio.

Step 4:

If your remote control becomes too hot to handle, turn it off and wait for it to cool down.

Try to Sync Roku Remote Again

Another way to get your Roku remote to manage the volume button again is to re-sync it with your Roku TV. 

Step 1:

At the same time, press the [home, back, and pair] buttons.

Step 2:

Push the buttons three times until the LED light blinks three times. Your Roku control has now been disconnected.

Step 3:

Turn your Roku TV off now.

Step 4:

The batteries in the Roku remote must be removed.

Step 5:

Re-insert the batteries in the remote and turn on the Roku device.

Step 6:

On the remote, press the pairing button.

Step 7:

Wait until the LED light blinks after pushing the pairing button. Your Roku will now be associated with your remote control. The volume buttons can then be used again.

Identify Your Remote Type

It’s also worth noting that there are several varieties of Roku remotes, so any issues you’re having could be due to the remote you are using. 

Decide what sort of Roku Remote you’re using with your streaming device before you start troubleshooting.

Your Roku remote can be either a basic infrared (IR) remote or a sophisticated “point-anywhere” remote. To determine which type you are using, open the battery compartment and look for the pairing button. 

Re-Set Your Remote for TV Controls

After ensuring that your remote’s battery is in good working order, you can try resetting your Roku remote for TV control. 

Step 1:

Go to the settings menu.

Step 2:

Select Remotes and Devices from the drop-down menu.

Step 3:

After that, need to toggle the remote control.

Step 4:

Select your remote control.

Step 5:

Set the remote to control the television.

Also, keep in mind that your Roku device will play music to assist you with the sophisticated remote setup. 

So you set your remote to regulate the volume on your television if you don’t listen to music or if your television doesn’t mute properly. After that, you might want to look over Roku’s troubleshooting instructions.

Re-Pair Your Remote

Step 1:

Remove the battery from your remote by opening the battery compartment.

Step 2:

Remove your Roku device’s power cable and wait at least 10 seconds before reconnecting it.

Step 3:

Return the batteries to the battery compartment of your remote once your Roku device has displayed its home screen.

Step 4:

Press and hold the pairing button, which is located in the remote’s battery compartment.

Step 5:

Do this for at least 5 seconds, or until your remote’s pairing light starts flashing.

Step 6:

If the pairing light does not flash, try again.

Step 7:

If it still doesn’t light up after your second attempt, the battery may need to be replaced.

Step 8:

Wait for 30 to 40 seconds for your remote Roku device to establish a connection after you see the pairing light.

Step 9:

The remote pairing dialogue should appear on your television screen after that.

Disable Private Listening

If that’s the case, it’s possible that the volume buttons on your Roku remote are not working properly. Because the sound is sent to your mobile phone or headphones when you utilize the private listening feature, this is the case.

As a result, the sound on your television is not controlled via the remote. Turn off the private listening function on your Roku to address the problem.

Try Using Other Codes

To try alternative codes, follow the instructions outlined below.

Step 1:

First and foremost, double-check the remote settings.

Step 2:

Select If you hear any music, yes.

Step 3:

Following that, you will receive a notice on your screen stating that the music has been turned off. Then choose Yes.

Step 4:

If you can hear the music, select the No option. After that, you’ll see a notification that says “Enter the brand of your television.”

Step 5:

The music will be played again once you’ve finished entering your brand. If you like to listen to music, choose Yes.


Q:- Why isn’t the volume on my Roku remote working?

Many factors could be at play, but firmware issues and apps are the primary culprits. This is causing issues with the remote and the television. As a result, restart your TV and Roku to get everything back to normal.

Q:- What can I do if the volume on my Roku remote isn’t functioning but the power button is?

It’s possible that some garbage and grease particles have gotten inside the volume buttons, causing them to stop working. To use it as before, carefully open the remote with a screwdriver and clean it with tissue paper. Check, it’ll work this time.

Q:- Why isn’t the Roku remote volume working now that it’s been updated?

Did you stop Roku from updating itself by interrupting the firmware download? If this is the case, the download is corrupt, which is why the volume is not operating. So, to fix everything, restart Roku and update it again. Be careful not to interrupt it while it is changing the firmware.

Final Thoughts

We have listed all of the remedies for the Roku tv set up remote not functioning issue. Any of these techniques should fix your Roku TV if it’s having problems due to an update, a hardware issue, or a technical fault. If nothing else works, call Roku customer service, who will take care of everything.

We tried to break down the many causes and solutions for a mute Roku system and a faulty Roku Remote in this article. 

Our goal was to keep the process simple and straightforward. We hope that this post saves you time and allows you to solve your problem quickly and easily.

You may also like

Watch YouTube Kids on Roku Streaming Device

How to Activate Fox Sports on Roku in 2021|

How to Watch Apple TV on Roku in 2021 |